Fosroc Brushcrete

Fosroc Brushcrete is a rapid-setting, high-strength, fiber-reinforced cementitious repair compound for patching and repairing concrete surfaces. It is ideal for repairing spalled concrete, cracks, honeycombs, and other defects in concrete structures. Fosroc Brushcrete is easy to apply and provides a durable, long-lasting repair.

Fosroc Brushcrete is a versatile and effective repair compound that offers rapid setting, high strength, and superior bonding properties. It is a water-based product that is easy to mix and apply, and it is suitable for a wide range of concrete repair applications.

Key benefits of Fosroc Brushcrete:

• Rapid setting: Fosroc Brushcrete sets rapidly, allowing for early traffic loading and reducing downtime.

• High strength: Fosroc Brushcrete achieves high compressive and flexural strength, providing a strong and durable repair.

• Fiber-reinforced: The addition of fibers enhances the tensile strength and impact resistance of the repaired area, preventing further cracking and spalling.

• Excellent bonding: Fosroc Brushcrete bonds strongly to existing concrete, ensuring a durable and cohesive repair.

• Easy to apply: Fosroc Brushcrete is a trowel-applied product that is easy to apply and requires minimal surface preparation.

Applications of Fosroc Brushcrete:

• Repairing spalled concrete, cracks, and honeycombs in concrete structures
• Patching and repairing defective concrete surfaces
• Restoring edges and corners of concrete structures
• Filling anchor holes and other voids in concrete
• Repairing damaged concrete slabs, beams, columns, and walls

Recommended preparation and application:

1. Surface preparation: Clean the surface thoroughly to remove loose particles, dirt, grease, and other contaminants. Dampen the surface to enhance adhesion.

2. Mixing: Mix Fosroc Brushcrete with water in the specified ratio to form a lump-free, workable consistency.

3. Application: Apply the mixed Fosroc Brushcrete to the prepared surface using a trowel or putty knife. Ensure even coverage and proper compaction.

4. Curing: Allow the applied Fosroc Brushcrete to cure properly as per recommended guidelines, typically 24-48 hours.

Additional notes:

• Fosroc Brushcrete should be applied in temperatures between 10°C and 40°C.

• Do not add more water than recommended, as this may affect the setting time and strength of the repair.

• If the repair area is larger than 10 mm in depth, apply Fosroc Brushcrete in multiple layers, allowing each layer to cure before applying the next.

• For detailed application instructions, refer to the product data sheet or technical guidelines.

Fosroc Brushcrete is a valuable tool for concrete repair professionals and DIY enthusiasts alike, offering a rapid, strong, and durable solution for restoring damaged concrete structures.